Recommended codecs when uploading onto concluence
- To achieve balance between fluency and detail in the uploaded video, usually H.264 720p NTSC/PAL is a good standard for video uploading
- The bit-rate shouldn't be too high at the same time quality needs to be assured
- This tutorial will be using Adobe Media Encoder
- All the parameters applies to other softwares
- Export project from Adobe Premiere/ After Effects/ Adobe Media encoder
- Open the option panel of codecs
- Should look like this:
- Choose H.264
- For preset choose 720p 25(if your source is PAL) or 720p 29.97/30(if your source is NTSC)
- For advanced settings(if you want to tweak, click on the yellow preset you've just chosen)
- VBR 2 Pass will have better quality than 1 Pass but slower to encode
- Set min/max/target bitrate. (Target Bitrate shouldn't exceed 12Mbps or else it will be very difficult for you to stream from outside of POLYU)
- Target bitrate will affect your filesize eg( 30 secs, if you use 8Mbps will be 30 X 8 / 8 bits/Byte = 30Mega Bytes for video part of the file)
- Should look like this:
- If you have any questions, please leave comment here.